How to Finance a Custom Home: 2026 Guide

Table of Contents

Last Updated: October 15, 2026

How to Finance a Custom Home: Your Loan Options

Financing a custom home starts with one decision: whether you want a construction-only loan or a single loan that converts to a permanent mortgage when the build is finished.

A construction loan is a short-term, higher-rate loan that funds the build in stages and is repaid or converted once the home is complete. Most buyers pair it with a permanent mortgage later, which means two closings and two sets of fees.

A couple reviewing construction blueprints and a laptop on a kitchen table, with a folder of loan documents and a calculator nearby
A couple reviewing construction blueprints and a laptop on a kitchen table, with a folder of loan documents and a calculator nearby

Construction-Only vs. Construction-to-Permanent Loans

Construction-only financing covers the build and nothing else. You close once for the construction loan, then close again on a permanent mortgage when the home is finished, which is why it is often called a two-close loan.

A construction-to-permanent loan, by contrast, is a single-close loan: one application, one closing, and the loan rolls into a permanent mortgage at the end of the build. The trade-off is less flexibility on your permanent rate at conversion time.

Loan Type Closings Rate Structure Best For
Construction-only Two Short-term rate, then permanent Buyers who want to shop rates later
Construction-to-permanent One One rate locked at closing Buyers who want simplicity
Land loan One Higher rate, shorter term Buying the lot first

How to Qualify for a Construction Loan

Qualifying for a construction loan is stricter than qualifying for a standard mortgage because the lender is underwriting two things at once: you as a borrower and the project itself.

On the borrower side, lenders typically review:

  • Credit score: Most conventional construction lenders look for a middle score in the mid-600s or higher, though government-backed options can go lower. A higher score usually translates to a lower rate and a smaller required down payment.
  • Debt-to-income ratio (DTI): Lenders calculate your total monthly debt payments against gross monthly income. A common ceiling is around 43%, but many construction lenders prefer to see it closer to 36% because they are also carrying the construction risk.
  • Income and employment: Two years of verifiable income history is standard. Self-employed borrowers usually need two years of tax returns plus a year-to-date profit-and-loss statement.
  • Cash reserves: Lenders often want to see enough liquid funds to cover several months of payments plus a cushion for overruns. A common pattern is six months of projected housing payments in reserve after closing.

On the project side, lenders want:

  • A licensed, insured general contractor with a signed construction contract
  • A full set of construction plans and specifications
  • A line-item cost breakdown that matches the plans
  • A realistic build timeline with milestones tied to draws
  • Permits or evidence they are in process
  • An appraisal that supports the completed value of the home

If you plan to act as your own owner-builder, expect extra scrutiny.

Watch Out
Submitting plans that don’t match your budget is the most common reason applications stall. Lenders compare your cost estimate against the plans line by line, and mismatches trigger delays or outright denials.

Can I qualify with imperfect credit? Many lenders work with buyers who have less-than-perfect credit, but you will likely pay a higher interest rate and may need a larger down payment. Talking to a lender early tells you exactly where you stand before you fall in love with a floor plan.

What if I already own the land? Owning the lot outright can strengthen your application because the equity in the land can count toward your down payment.

A practical first step is to get pre-qualified before you shop for land or finalize plans.

Construction Loan Down Payment Requirements

A common approach is to put down a percentage of the total project cost, which includes the land, the build, and the closing costs.

How LTV is calculated matters. Lenders typically use the lesser of the appraised value of the completed home or the total project cost.

Here is how different borrower profiles change the cash you need at closing:

  • You already own the land free and clear: The appraised value of the lot can count toward your equity, which lowers the cash you need. If the lot is worth $80,000 and the total project is $400,000, that equity can cover a meaningful share of your down payment.
  • You own the land but still owe on it: The remaining land loan balance is subtracted from your equity, and the payment is included in your DTI. You may need more cash at closing than a free-and-clear owner.
  • You still need to buy the land: A combined construction-to-permanent loan can roll the land purchase and the build into one closing, but the lender will appraise the land separately and may require a larger down payment if the lot value is uncertain.
  • Lower credit score: Usually means a larger down payment, often 25% or more, and a higher interest rate.
  • Owner-builder: Many lenders require 25% to 30% down, plus a larger cash reserve, because the lender is taking on more risk.

Cash reserves are a separate requirement from the down payment. Lenders often want to see several months of projected housing payments set aside after closing.

Pro Tip
Ask your lender how they calculate LTV on your specific project before you commit. The difference between using appraised value and total project cost can change your required cash by thousands of dollars.

Closing costs on a construction loan are another cash item to plan for. They can include origination fees, appraisal fees, title search and insurance, recording fees, and draw inspection fees. On a construction-to-permanent loan, you pay closing costs once instead of twice, which can save a meaningful amount compared with a two-close structure.

If your cash is tight, ask about lender-paid mortgage insurance or a slightly higher rate in exchange for a lower down payment.

Why a Construction-to-Permanent Loan Simplifies the Process

A construction-to-permanent loan simplifies the process because it replaces two closings with one. You apply once, close once, and the same loan converts to a permanent mortgage when the final inspection passes.

That single-close structure saves you a second round of closing costs and loan fees, and it removes the risk of being turned down for a permanent mortgage after the home is already built. For buyers who want predictability, that matters more than chasing a lower rate later.

The one drawback: if rates drop during your build, you may be locked into the rate you set at closing. Buyers who want to shop for a permanent mortgage after construction should lean toward a two-close structure instead.

Contact us now! →

Financing Land and Home Construction Together

Financing land and home construction together usually means a single combined loan that covers the lot purchase and the build. This is the cleaner path for buyers who have not yet secured land.

If you buy the land separately first, you will likely use a land loan, which typically carries a higher interest rate and a shorter loan term than a construction loan. You can sometimes refinance that land loan into your construction financing later, but the timing has to line up with your build schedule.

U.S. Department of Housing and Urban Development homebuying resources outlines federal programs that can help first-time buyers understand their financing options before they commit to land.

Building Your Budget: Soft Costs, Contingency, and Draws

Your project budget is more than lumber and labor. Soft costs, contingency reserve, and the draw schedule decide whether your financing holds up from start to finish.

Soft costs include building permits, appraisal fees, and site preparation, and they add up faster than most first-time builders expect. A contingency reserve of a set percentage of your build cost protects you when materials costs shift or a surprise repair appears during site work.

Construction draws work on a schedule: the lender releases funds in stages as inspections confirm each phase is complete. Miss a milestone and the disbursement pauses, which can stall your builder.

Pro Tip
Ask your lender for the draw schedule before you sign. Knowing exactly when each disbursement lands lets you time payments to your contractor and avoid fronting costs out of pocket.

What Happens When a Custom Home Build Goes Over Budget

A cost overrun is the single biggest risk in custom home financing, and the fix depends on how much you have left in your contingency reserve. If the overrun is small, your reserve absorbs it and the build continues.

If it is large, you have three realistic options:

  • Increase your loan amount if your lender allows a change order and your appraisal supports it
  • Pay the difference in cash to keep your loan term and payment unchanged
  • Scale back finishes or scope to bring the budget back in line

Delays work differently. A build timeline that slips past your construction loan term can trigger an extension fee or force a rushed conversion to your permanent mortgage. Builders and lenders both track the schedule for this reason.

Consumer Financial Protection Bureau guidance on construction loans explains how construction loan terms and conversion rules work, which helps you spot an extension clause before it costs you.

Conclusion: Choosing the Right Path for Your Custom Home

Getting the financing structure right early saves you money and stress later, whether you choose a single-close loan or a two-close path. The buyers who struggle most are usually the ones who picked a loan before they understood their full project budget.

At Patriot Homes, we build customizable manufactured homes that fit real budgets, with options for bedrooms, bathrooms, and finishes so you can personalize the layout. Our team is available 24/7 to guide you through every step, and if you already own land, we can help you plan a home for it.

Get started with Patriot Homes and move into a home built around your budget, not the other way around.

Frequently Asked Questions

How much would a $100,000 construction loan cost per month?

Monthly payments on a $100,000 construction loan depend on the interest rate and whether the lender charges interest-only payments during the build. During the construction phase, you typically pay interest on the amount drawn so far, not the full loan amount. Once the home is complete and the loan converts to a permanent mortgage, payments include principal and interest. Ask your lender for a draw schedule and an amortization estimate before you sign.

Do you need 20% down for a construction loan?

Many construction lenders ask for 20% down, but that is not a universal rule. Some programs allow 10% or 15% down with private mortgage insurance or a higher interest rate. Down payment requirements also vary based on the loan type, your credit profile, and whether you already own the land. If you are using a construction-to-permanent loan, the down payment is usually set at closing and carries through to the permanent mortgage.

What credit score do you need to qualify for a construction loan?

Most construction lenders look for a credit score of at least 620, though some prefer 680 or higher. A stronger score can lower your interest rate and improve your chances of approval. Lenders also review your debt-to-income ratio, income verification, and cash reserves. If your credit is below the typical threshold, a co-signer or a larger down payment may help you qualify.

Can you use a construction loan to buy land and build a home?

Yes, some construction loans let you finance both the land purchase and the build in one package. This is often called a construction-to-permanent loan with land acquisition included. The lender appraises the land and the planned home together, then sets a loan amount based on the as-completed value. If you already own the land, you may be able to use its equity toward your down payment.

How does a construction-to-permanent loan work?

A construction-to-permanent loan covers the build phase and then converts into a standard mortgage once the home is finished. During construction, you make interest-only payments based on the funds drawn. After the final inspection and certificate of occupancy, the loan converts to a permanent mortgage with principal and interest payments. This single-close process saves you from paying two sets of closing costs.

What types of loans can you use to finance a custom home?

Common options include construction-only loans, construction-to-permanent loans, and in some cases a bridge loan combined with a permanent mortgage. Government-backed programs such as FHA, VA, and USDA loans may also work for custom builds if the lender and builder meet program requirements. Each option has different down payment, credit score, and draw schedule rules. Compare loan terms carefully before choosing.